Description
★ Fingerprint padlock Parameters:
1. Unlock method: Fingerprints
2. No. of Fingerprints: 10
3. Battery Model:CR2032
4. Standby Time:12 Months
4. Size:76*46*20 mm
5. IP Rating:IP67
6. Working Temp.-10 ～ 45℃
★ Register Fingerprints：
1. Press and hold for around 5 seconds fingerprints to unlock the device till the blue light turns on.
2. Put the new fingerprint on the identification area and tap time by time till the light turns off.
3.Now, a new fingerprint is successfully registered.
★ Delete all Fingerprints：
1. Press and hold by using the pre-registered
fingerprints to unlock the device.
2. The color of light will change from blue to white, then to red. Release finger once the light turns red, which means all registered fingerprints are successfully deleted.
Trouble Shooting：
Try several more times as per instructions above to unlock the device if you see any malfunction. If still fail, please change the button cell and try again.
★ Password Padlock Parameters:
1. Unlock method: Password
2. Length of Password: 6 digits
2. No. of password: 10 passwords
3. Standby Time: 12 months
4. Size: 76*46*22 mm
5. IP Rating: IP67
6. Working Temp.-10 ～ 45℃
★ Register password:
1. Input the password (factory default password)to unlock.
2. Input ⑨⑨⑨⑨⑨⑨ and green light
turns on. Input 6 digits desired password. The green light blinking means the password is successfully set.
★ Delete all password:
Input password to unlock the device. Input ⑦⑦⑦⑦⑦⑦ and red light turns on. Input unlock password again. Green light turns on shows all passwords are cleaned and the device turns back to factory default. Otherwise, failed to verify the password will exit the setting model.
